Tiny whoop Batteries
Hi guys back with another link to, probably, ancient stuff. I have my shopping cart pretty much full, but of course banggood don't have stock of the E010 batteries I need so I have been looking for...
View ArticleClik here to view.
Teaser--Micro Mauler Hex
Just started work on a 150 (ish) sized Hex. WIP at the moment. But here is a teaser. Will be running: Lumineer PDB with Pololu 5V 1 amp Rotor X 1105B 6500kV motors Rotor X quad 3 inch props DYS 10amp...
View ArticleFirst Post! Tiny Whoop
I have Marvel Vision Goggles that I got from TinyWhoop.com, only way I've figured out to capture flights is to put my phone in the Goggles and record that way. Any suggestions are appreciated, I heard...
View ArticleClik here to view.
Eachine E10 on 2s LiPo
Hi! As I promised I tested the Gheto whoop on 2s Lipo, no mods, everything in stock. Main reason why to do so, is that I ordered too heavy fpv (2 times, one set for me, second for my sister). I hav...
View ArticleImprovising :)
http://www.airvuz.com/video/57e3188847261b78ba12bdd0 - for mobile Phones if youtube block the video...
View ArticleClik here to view.
BlackBox tuning
Please someone check my BlackBox log. Quad flies OK, but i think it can go better Black Box file: https://drive.google.com/open?id=0BxVBkV...GRfcWFFUWs Setup: Frame: Lisam LS-210 FC: Xracer F303 v3.1...
View ArticleClik here to view.
(New arrival) GTeng T905C Quadcopter - RTF
New arrival GTeng T905C Quadcopter - RTF 720P Camera 2.4GHz 4CH 6 Axis Gyro Altitude Hold Headless Mode The price down to $51.91 After coupon "RC15OFF" (Original Price is $61.07) Do not miss it! Got...
View ArticleClik here to view.
Hi! ...and a question.
Hello everyone This looks like a friendly forum. First to introduce myself, i've been flying FPV quads for a bit more than a year now and enjoying it very much. Coming from heli's, i didn't have...
View ArticleBeginner FPV RTF drones
Hey there, Can anyone suggest a good beginner fpv racing drone? I was looking at the Storm Racing drones and they looked pretty cool. What do you guys think about the drone below....
View ArticleBasement Carpark Rip
So we head out after tucking the kids to sleep only to be greeted by a storm at the usual spot when we were about to liftoff. Left with not much choice but to visit the basement carpark, it was well...
View ArticleClik here to view.
New tiny whoop? It better Bee good
Sorry for the puns, I can't help it. Anyway, I saw this on banggood and thought it was hilarious! It is a new FPV micro quad by Eashine called the Fate FB90 According to the description it comes with...
View ArticleClik here to view.
DYS SN20a DampedLight Problem
So I've taken my ZMR250 for a flight or two and had a blast until I crashed. After that I noticed, that my my ESCs don't brake anymore. I'm running DYS SN20a with BlHeli 14.7 (that makes them BL20a I...
View ArticleBucket flow
I tried to fly with music a few days ago, so relaxing. The outcome - some bunny hopping between trees hehe.
View ArticleClik here to view.
Eachine Fatbee FB90 New tiny whoop? It better "Bee good"
Sorry for the puns, I can't help it. Anyway, I saw this on banggood and thought it was hilarious! It is a new FPV micro quad by Eachine called the Fatbee FB90 According to the description it comes...
View ArticleClik here to view.
Naze32 Rev6 Altitude Hold
So im new to this great world, and Im trying to figure out if its possible to have altitude hold on the Naze32 Rev6 board. my friend who own a phantom 3 is always up in the air filming and every time...
View ArticleClik here to view.
Eachine ET200 strange behavior
dear fanatics got a question what is the resistance between signal and ground in your vtx? https://drive.google.com/open?id=0ByAqK1...p1SDF6QXhJ pins for ground and signal are behaving strange... 175...
View ArticleHelp with "curr"value - Telemetry Kiss FC - 24A ESC's
Hi All, Hope someone can help me with this....: I have a question about the current ("curr") telemetry sent from the Kiss FC to my Taranis. At 50% throttle I am seeing current values ("curr") of...
View ArticleClik here to view.
Rush! Montage
Cut together from around flight #10 to #40. It's kiss FC/kiss firmware, took me a long time to get PIDs right, so there's parts where it's loose, shaky, even parts with mid throttle oscillations, and...
View ArticleSingle axis tunig
Hello people, I see on youtube a lot of movies from people who tune the pid loops for one axis. They then take the opposite props of the quadcopter and going to tune. Put can you also do this for a X...
View ArticleClik here to view.
Rage 210RS - build log
Hi everyone This is gonna be a slow (and my first) build log, means i'll take my time and enjoy it, laying out every step in my head before touching things so i (hopefully) won't come to unexpected...
View Article
