i just put a REAL capacitor on, i had a radio shack 35v 470uf (m) series..and it worked fine.it stoped the problem i was having with freak outs and fail safes.....i was thinkin i would try a low esr..so i put a panasonic 35v 1000uf (fr) series from mouser electronics, and now after about 15 seconds of maneuvers or a flip, it fail safes... is the size of the CAP doing this, what i asking is, is the cap filling up then releasing energy over powering my 3s battery....im only running a 3s on this one, and 2600kv emax red bottoms.....
i have some smaller ones i could try out, but my goggle fan switch went out so im kinda grounded for a few,...so i thought i would ask and get some thought before i just start in on the PART CHANGE and TEST again..
i did this to one of my other quads..but i put 4- 330uf 25v fr series on the esc, it made a HUGE difference in blackbox, and i could tell right away the sharper response due to cleaner signal..so this is why i thought maybe 1000uf and 35v is to big, if that a thing?lol
i have some smaller ones i could try out, but my goggle fan switch went out so im kinda grounded for a few,...so i thought i would ask and get some thought before i just start in on the PART CHANGE and TEST again..
i did this to one of my other quads..but i put 4- 330uf 25v fr series on the esc, it made a HUGE difference in blackbox, and i could tell right away the sharper response due to cleaner signal..so this is why i thought maybe 1000uf and 35v is to big, if that a thing?lol
